Still not convinced this light is bright enough? A D7 pod will outshine seven D2 lights and produces more than twice the light output of our beastly D4 light pod.

Choose to add an additional set of amber or selective yellow lenses to achieve greater performance in adverse weather conditions or to make your vehicle significantly more visible to other motorists on the road!

More Flexibility, Maximum Control

For 2022 we have expanded on our standard light kit to deliver a customizable package that allows you to choose the best harness and lighting control option for your vehicle on your budget! Select from the options above or click on the links below to learn more about each of our wiring and switching options.  Please be sure to add one of these options to your light pods to complete your DENALI lighting kit!

• Standard Powersports Harness  – Robust, inexpensive, low-profile waterproof switch – the best option for a basic single intensity install
• Standard Automotive Harness – Robust, added length, and a flush mount illuminated rocker switch for dash mounting
• Premium Powersports Harness – Overmolded wire, and a premium illuminated switch with handlebar mounting kit
• DataDim Module – Add this clever dimmer module to any of the above harnesses to enable your lights to change intensity in sync with your factory high beam switch!
• DialDim Lighting Controller – The top dog in LED lighting control allows you to independently turn on/off and dim two sets of lights from a single halo dimmer switch and unlocks heaps of bonus features like high/low sync, strobe with horn, flash with signal, cancel with signal, electronic fuse setting and even doubles as a battery voltage monitor!

And last but not least we also make a complete accessory manager (The CANsmart Controller) that has dozens of customizable settings for controlling LED lights but can also be used to power and control any electrical accessories from lights and horns to heated grips, dash cams and GPS units.

D7 Pod Features

• High-Intensity Series Cree LEDs outputting 7665 lumens per pair
• E Mark Approved Spot Lens reaches over 1500 ft at one lux
• DataDim equipped light pods enable plug and play connection, and integrated dimming, with DENALI dimming and lighting controllers.
• DrySeal Submersible Waterproof light housings can withstand the most extreme environments
• Impact PC Polycarbonate bezels won’t crack, fade or corrode like traditional aluminum bezels
• LiveActive Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
• Low profile mounting bracket with stainless steel hardware included
• Interchangeable lenses available in Clear, Amber, and Selective Yellow

D7 Pod Specs (Pair)

• LED’s: (14x) 10 Watt Cree XPL HI
• Power Draw: 10 Amps
• Raw Lumens: 15330
• Beam Distance: 1505 feet
• Beam Width: 200 feet
• DataDim Compatible: Yes
• Operating Voltage: 12 VDC
• Pod Size: 4.4″ Round x 2.9″ Deep
• Pod Weight: 1.8 lbs
• IP67 Waterproof & Submersible
• E Mark Approved Spot Lens

D7 Product Bundles – What’s Included?

This product page lets you customize your D7 light kit. Please note that the light pods, colored lens kits, and wiring harnesses are packaged separately.

D7 Light Pod Box Contents – DNL.D7.050

• (1x) LED Light Pods
• (1x) Hinge Mounts with M8 Stainless Steel Hardware
• (1x) Wiring Pigtail

D7 Lens Kit Box Contents – DNL.D7.10100 (amber) – DNL.D7.10200 (yellow)

• (2x) Spot Lenses (Amber or Yellow)

DENALI 2.0 LED Auxiliary Lighting Guide
Designed specifically for motorcycles the DENALI 2.0 LED TriOptic auxiliary lights with DataDim technology maximize visibility in an extremely durable efficient compact yet very powerful package. The DENALI 2.0 product line carries a 5-year warranty.
DENALI 2.0 LED TriOptic Auxiliary Light Kits
TriOptic lenses feature spot and either flood or hybrid options to customize your illumination needs while DataDim technology provides dual intensity with the addition of a plug and play module. With black powder coated cooling fins to keep the LEDs cool and operating at full strength an Impact PC corrosion proof bezel protecting the front of the lights from stone chips and DrySeal submersible waterproof construction your way will be clear no matter the conditions.
DENALI D7 2.0 LED TriOptic Light Kit 1500ft maximum range 15330 raw lumens 4.5n round 10 ampstotal draw DENALI S4 2.0 LED TriOptic Light Kit 540ft maximum range 6132 raw lumens 2.8in square 4.6 amps total draw DENALI D4 2.0 LED TriOptic Light Kit 800ft maximum range 8760 raw lumens 3.9in square 6.6 amps total draw Includes spot & True-Hybrid lens DENALI DR1 2.0 LED TriOptic Light Kit 1000ft maximum range 2190 raw lumens 3.7in round 1.6 amps total draw Includes spot & True-Hybrid lens DENALI D2 2.0 LED TriOptic Light Kit 525ft maximum range 2190 raw lumens 2.2in round 1.6 amps total draw Includes spot & flood lens DENALI DM 2.0 LED TriOptic Light Kit 395ft maximum range 2190 raw lumens 1.7in round 1.6 amps total draw Includes spot & flood lens
DENALI 2.0 Light Specific TriOptic Amber Lens Kits
DENALI 2.0 TriOptic amber lenses are an optional accessory for added daytime visibility and fog-cutting performance. Each kit includes a set of amber spot lenses as well as a set of amber flood or True-Hybrid lenses allowing you to select one or both options to customize your illumination.
DENALI DM 2.0 Amber Lens Kit Replacement lens kit Includes spot & flood lens	DENALI D2 2.0 Amber Lens Kit Replacement lens kit Includes spot & flood lens	DENALI DR1 2.0 Amber Lens Kit Replacement lens kit Includes spot & True-Hybrid lens	DENALI D4 2.0 Amber Lens Kit Replacement lens kit Includes spot & True-Hybrid lens
DENALI 2.0 TriOptic LED Light Kit Accessories
DENALI 2.0 accessories expand the functionality of your existing DENALI 2.0 TriOptic Light Kit
DENALI 2.0 DataDim Dual Intensity Controller Plug this module into your DENALI 2.0 TriOptic Light Kit to allow switching between full and half intensity with your high beam switch	DENALI 2.0 Hi-Low-Off Waterproof Switch Replace the standard On-Off switch in your DENALI 2.0 TriOptic Light Kit to enable independent control of your DataDim Dual Intensity Controller	DENALI 2.0 Y-Splitter Kit Allows installation of a second pair of DENALI 2.0 TriOptic Light Pods on your existing DENALI 2.0 TriOptic Light Kit	DENALI 2.0 Light Harness Extension Single 24 inch plug and play harness extension allows expansion of your existing DENALI 2.0 TriOptic Light Kit mounting options
DENALI DRL and Brake Light Options
DENALI DRL and brake lights were built to create the most amount of light from the smallest slimmest housing possible
DENALI DRL Daytime Running Lights With Universal Offset Mounting Kit Designed for fitting a pair of DENALI DRL pods to the side of any M6 hardware mounting point on your motorcycle	DENALI DRL Daytime Running Lights With Universal Fender Mounting Kit Designed to mount a pair of DENALI DRL pods on the front fender of your bike	DENALI B6 Flush Mount LED Auxiliary Brake Light Designed to mount a single B6 Pod to any flat surface on your vehicle	DENALI B6 Dual License Plate LED Auxiliary Brake Lights Designed to mount to either side of your license plate

Understanding DENALI 2.0 Wiring

The post DENALI D7 2.0 TriOptic LED Light Pod appeared first on Twisted Throttle.

Designed specifically for the Honda Africa Twin CRF1000L. Fits DCT and Non-DCT models.

Features:

• Includes bar end weights
• Two mounting points provide secure protection
• Full wrap guards
• Heat treated aluminum backbone bars
• Easy installation
• Compatible with all Barkbusters JET,  VPS,  Storm or CARBON deflector guards (not included)

Barkbusters Handguard Kits

Designed and manufactured in Australia since 1984 Barkbusters’ superior design and quality are world renowned. Multiple single and two point mounting systems are available as well as a variety of guard designs providing Barkbusters Handguard Kits that fit most motorcycles and meet your exact needs.

SABRE for Motocross and Enduro motorcycles

SABRE Handguard Kits with top & bottom deflectors fitted, riders have the ultimate coverage from roost, trail debris and harsh environments.

Clamps manufactured from high grade aluminum with adjustable fit in 2 side positions.

JET for Dual Sport Enduro and Trail motorcycles

JET Handguard Kits feature impact resistant replaceable plastic guards as well as two-point heat treated aluminum mounting backbones for superb impact protection or single point bar end mounts to provide weather protection.

245mm (9.6in) wide and 110mm (4.3in) tall JET guards are interchangeable with VPS STORM and CARBON guards and are available in Black Blue Green Orange Red White or Yellow.

If purchasing backbones and guards separately here are the JET Guards a-la-carte.

VPS for Adventure Enduro Motocross Street and Supermoto motorcycles

VPS Handguard Kits feature high-impact resistant replaceable plastic guards as well as heat-treated two-point aluminum mounting backbones for superb impact protection or single point mounts to provide weather protection. VPS-MX Handguard Kits are open ended guards specifically designed for competition motocross.

250mm (9.8in) wide and 105mm (4.1in) tall or 130mm (5.1in) tall with deflector VPS guards are interchangeable with JET STORM and CARBON guards and are available in Black Black on Black Blue Green Orange Pink Red Silver White or Yellow.

If purchasing backbones and guards separately here are the VPS Guards a-la-carte.

STORM for Adventure Cruiser Scooter and Street motorcycles

STORM Handguard Kits feature replaceable large guards that provide extra wind and element protection as well as heat treated two-point aluminum mounting backbones for superb impact protection or single point mounts for weather protection.

275mm (10.8in) wide and 170mm (6.7in) tall STORM guards are interchangeable with JET VPS and CARBON guards and are available in Black.

If purchasing backbones and guards separately here are the Black Storm Guards and the White Storm Guards a-la-carte.

CARBON for Street motorcycles

CARBON Handguard Kits feature genuine hand laid carbon fiber guards as well as heat treated two-point aluminum mounting backbones for superb impact protection or single point mounts for weather protection. CARBON Handguard Kits are not recommended for off-road applications.

250mm (9.8in) wide and 120mm (4.7in) tall CARBON guards are interchangeable with JET VPS and STORM guards and are available in Black Carbon Fiber.

If purchasing backbones and guards separately here are the Carbon Guards a-la-carte.

EGO for Enduro Trail and Mini motorcycles

EGO Handguard Kits feature high-impact resistant replaceable plastic guards coupled with a heat treated two point aluminum mounting backbones to produce one of the world’s toughest and most durable handguards. The compact curved profile of the bars and guards provide added strength and also allow for tighter trail riding. EGO Mini Handguard Kits are 20mm shorter making them ideal for small motorcycles.

EGO guards are available in Black Blue Green Orange Red White and Yellow.

EGO guards are not compatible with standalone Barkbuster Backbone Aluminum Handguard kits.

BBZ for Adventure Cruiser Scooter and Street motorcycles

BBZ Handguard Kits feature large fabric guards lined with a waterproof and windproof membrane that provide excellent foul and cold weather protection. BBZ handguards have a universal mounting system that can be fitted over existing Barkbusters Handguard Kits or independently to most motorcycles.

325mm (12.8in) wide and 170mm (6.7in) tall BBZ guards are compatible with most motorcycle handlebars.

AERO-GP for or Street and Track motorcycles

Aerodynamic GP-styled lever protector will protect your levers for use on the track where tight elbow to elbow racing is commonplace and for street riders who ride with others or in groups.

Includes fitment to suit 6mm or 8mm internal thread handlebar as well as unique locking system for hollow handlebar.

The post Barkbusters handguard with all mounting hardware For Honda CRF1000L Africa Twin DTC and non DTC appeared first on Twisted Throttle.

The post SW-Motech Smartphone-Drybag for MOLLE system | Black appeared first on Twisted Throttle.

UniversalFit for almost all motorcycles.
4-point strap fastening with a sense of stability.
Zipper mesh pocket on the back of the lid.
CoveredZipper. With RubberLoop to reduce flapping.
Non-slip material is used for the bottom part that contacts Seat.
Made of durable, UV-resistant 1680DBallistic nylon (water-repellent internal coating).
Reflector for better visibility.
MOLLEAttachment made with HypalonMaterial for attaching additional bags.
Robust Handlebar.

The post SW-Motech PRO Rearbag tail bag 1680D Ballistic Nylon | Black 22-34 L appeared first on Twisted Throttle.

UniversalFit for almost all motorcycles.
4-point strap fastening with a sense of stability.
Zipper mesh pocket on the back of the lid.
CoveredZipper. With RubberLoop to reduce flapping.
Non-slip material is used for the bottom part that contacts Seat.
Made of durable, UV-resistant 1680DBallistic nylon (water-repellent internal coating).
Reflector for better visibility.
MOLLEAttachment made with HypalonMaterial for attaching additional bags.
Robust Handlebar.

The post SW-Motech PRO Cargobag tail bag 1680D Ballistic Nylon | Black 50 L appeared first on Twisted Throttle.

The Kaoko Throttle Stabilizer Kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer (OEM) bar end weight. Most installations simply require the removal of the OEM bar end weight and the fitting of the Kaoko Throttle Stabilizer kit in its place.

The post Kaoko Throttle Lock Cruise Control For Honda CRF1000L Africa Twin ’16-’20 | With Barkbuster Handguards appeared first on Twisted Throttle.

This listing is for the SADDLEBAGS ONLY! Bike Specific Support Arms are sold separately!!

The PRO BLAZE saddlebags with removable support arms impress with a sporty look, low weight and a clever fastening system. SW-MOTECH manufactures the bags from robust and especially UV-resistant 1680D Ballistic Nylon. In combination with side panels made of dimensionally stable EVA material, the luggage is protected from splashing water and dust. Developed specifically for sporty motorcycles, the saddlebags have minimal effect on handling performance. When travelling without luggage, the removable support arms can be detached with a simple step, leaving only inconspicuous holders behind on the bike.

The post SW-Motech PRO BLAZE H saddlebags 1680D | Pair appeared first on Twisted Throttle.

• The matching PRO tank ring is required for mounting on the tank.
• Tank bags from the PRO series cannot be combined with EVO tank rings.
• Cable feed-through on the front and rear of tank bag.

The PRO SPORT Tank Bag offers elegant and timeless design together with durable materials and sophisticated product features: Ballistic nylon material protects the luggage against shocks wind and weather. The top made of laminated EVA material gives the bags a distinctive shape and along with a MOLLE attachment ensures a secure hold for smartphone and tablet holders.

The factory-fitted upper ring guide rail allows for the tank bag to adapt to the shape of the tank and the ergonomic needs of the driver much more easily. Only the PRO tank bags offer this flexibility. Matching this SW-MOTECH offers the patented PRO tank rings made of fiberglass-reinforced plastic. They are made to match the motorcycle model. The robust PRO tank ring with magnetic guide aid secures the PRO tank bags with a mechanical QUICK-LOCK snap lock. This allows the tank bags to be attached or removed with just one hand.

Features:

PRO Tank Ring Application Chart​

The post SW-MOTECH PRO Sport Tank Bag for QUICK-LOCK PRO Tank Rings | 12-17L appeared first on Twisted Throttle.

• Ensure that there is sufficient space between the tank bag and the surface of the tank (also when fully loaded) to avoid damage to the paintwork. If there isn’t enough room between the two the surface of the tank can also be protected by a protective film or a tank pad.
• The matching PRO tank ring is required for mounting on the tank.
• Tank bags from the PRO series cannot be combined with EVO tank rings.
• Cable feed-through on the front and rear of tank bag.

The PRO Engage Tank Bag offers elegant and timeless design together with durable materials and sophisticated product features: Ballistic nylon material protects the luggage against shocks wind and weather. The top made of laminated EVA material gives the bags a distinctive shape and along with a MOLLE attachment ensures a secure hold for smartphone and tablet holders.

The factory-fitted upper ring guide rail allows for the tank bag to adapt to the shape of the tank and the ergonomic needs of the driver much more easily. Only the PRO tank bags offer this flexibility. Matching this SW-MOTECH offers the patented PRO tank rings made of fiberglass-reinforced plastic. They are made to match the motorcycle model. The robust PRO tank ring with magnetic guide aid secures the PRO tank bags with a mechanical QUICK-LOCK snap lock. This allows the tank bags to be attached or removed with just one hand.

Features:

PRO Tank Ring Application Chart​

The post SW-MOTECH PRO Engage Tank Bag for QUICK-LOCK PRO Tank Rings | 7-10L appeared first on Twisted Throttle.

• The matching PRO tank ring is required for mounting on the tank.
• Tank bags from the PRO series cannot be combined with EVO tank rings.
• Cable feed-through on the front and rear of tank bag.

The PRO Daypack Tank Bag offers elegant and timeless design together with durable materials and sophisticated product features: Ballistic nylon material protects the luggage against shocks wind and weather. The top made of laminated EVA material gives the bags a distinctive shape and along with a MOLLE attachment ensures a secure hold for smartphone and tablet holders.

The factory-fitted upper ring guide rail allows for the tank bag to adapt to the shape of the tank and the ergonomic needs of the driver much more easily. Only the PRO tank bags offer this flexibility. Matching this SW-MOTECH offers the patented PRO tank rings made of fiberglass-reinforced plastic. They are made to match the motorcycle model. The robust PRO tank ring with magnetic guide aid secures the PRO tank bags with a mechanical QUICK-LOCK snap lock. This allows the tank bags to be attached or removed with just one hand.

Features:

PRO Tank Ring Application Chart​

The post SW-MOTECH PRO Daypack Tank Bag for QUICK-LOCK PRO Tank Rings | 5-8L appeared first on Twisted Throttle.