Automotive Offroad Lighting
Motorcycle Electronics
Motorcyle Accessories
Power Management
Automotive Accessories
Outback Offroad Lighting
Information
- SKU:
- BB.BS10
- Brand:
- Barkbusters
- Weight:
- 0.05 lbs
- Dimensions:
- 1 × 1 × 1 in
Barkbusters
240 ITEMS
Sort By
Price: low to high
Sort By
Price: low to high
Information
- SKU:
- BB.BS20
- Brand:
- Barkbusters
- Weight:
- 0.07 lbs
- Dimensions:
- 1 × 1 × 1 in
Information
- SKU:
- BB.BS30
- Brand:
- Barkbusters
- Weight:
- 0.1 lbs
- Dimensions:
- 1 × 1 × 1 in
Information
AUSTRALIAN MADE – “Aussie Made Aussie Tough” Screw Kit (set of 4). For fitting JET, EGO, VPS or STORM plastic guards to a Barkbusters backbone.
- SKU:
- BB.B65
- Brand:
- Barkbusters
- Weight:
- 1 lbs
- Dimensions:
- 1 × 1 × 1 in
Information
For use with Pro Taper SE (seven-eighths) alloy handlebars and other aluminum handlebars with a smaller internal diameter than standard steel handlebars.
- SKU:
- BB.B27
- Brand:
- Barkbusters
- Weight:
- 0.12 lbs
- Dimensions:
- 1 × 1 × 1 in
Information
This kit allows Barkbusters VPS or Storm full-wrap aluminum backbones to be installed into the ends of handlebars with a 10mm inner diameter (ID).
- SKU:
- BB.B25
- Brand:
- Barkbusters
- Weight:
- 0.03 lbs
- Dimensions:
- 1 × 1 × 1 in
Information
The Barkbusters 10 OHM Resistor Set for LED Indicator Lights will correct the flash rate of your auxiliary signal lights. Ready to plug in connectors make installation a breeze. These resistors are intended for Barkbusters LED Indicator Lights
- SKU:
- BB.LED-RES-001
- Brand:
- Barkbusters
- Weight:
- 0.11 lbs
- Dimensions:
- 1 × 1 × 1 in
Information
AUSTRALIAN MADE – “Aussie Made Aussie Tough” STORM Saddle Kit with Screws (set of 2). For fitting STORM plastic guards to Barkbusters backbones.
- SKU:
- BB.B64
- Brand:
- Barkbusters
- Weight:
- 1 lbs
- Dimensions:
- 1 × 1 × 1 in
BB.B45*
$19.99 – $21.99 USD
Free Delivery on orders over $50
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
BB.GRP.P*
$19.99 USD
Free Delivery on orders over $50
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
Created using a soft dual compound rubber with a larger diameter for comfort and performance, Barkbusters Grips are designed to provide greater control and reduce hand fatigue in all weather conditions. The universal fit allows for use on street, dirt or dual sport bikes
- SKU:
- BB.GRP.P
- Brand:
- Barkbusters
- Weight:
- 1 lbs
- Dimensions:
- 1 × 1 × 1 in
- Color:
Information
This kit allows Barkbusters VPS or Storm full-wrap backbones to be installed into the ends of handlebars with an 18mm inner diameter opening including Barkbusters VSB bars and the original Motor Guzzi Stelvio handlebars.
- SKU:
- BB.B26
- Brand:
- Barkbusters
- Weight:
- 0.14 lbs
- Dimensions:
- 1 × 1 × 1 in
Information
- SKU:
- BB.B29
- Brand:
- Barkbusters
- Weight:
- 0.12 lbs
- Dimensions:
- 1 × 1 × 1 in
Information
Mount Storm S5 Handguards to 1 inch diameter handlebars with Barkbusters replacement bar end mounting inserts.
- SKU:
- BB.B-074
- Brand:
- Barkbusters
- Weight:
- 0.1 lbs
- Dimensions:
- 1 × 1 × 1 in
Information
This adapter allows installation of Barkbusters BB.BHG10 handguards onto bikes without original BMW heated grips.
- SKU:
- BB.B62
- Brand:
- Barkbusters
- Weight:
- 0.11 lbs
- Dimensions:
- 1 × 1 × 1 in
Information
8" x 24" Barkbusters header card.
- SKU:
- TT.HC.BB
- Brand:
- Barkbusters
- Weight:
- 0.2 lbs
- Dimensions:
- 1 × 1 × 1 in
Information
Barkbusters complete Easy Fit Clamp assembly with Swivel for 22mm (7/8") dia. handlebars, each
- SKU:
- BB.B51
- Brand:
- Barkbusters
- Weight:
- 0.22 lbs
- Dimensions:
- 1 × 1 × 1 in
Information
Mount S7 Storm or BBZ Handguards to your Yamaha FZ-09 MT-09 MT-07 or FZ-07 with Barkbusters Bar End Adapter Mounts.
- SKU:
- BB.B-083
- Brand:
- Barkbusters
- Weight:
- 0.13 lbs
- Dimensions:
- 1 × 1 × 1 in
Information
Barkbusters saddle clamp adapter kit for mounting handguards to motorcycles with Magura handlebars.
- SKU:
- BB.BSS-01
- Brand:
- Barkbusters
- Weight:
- 0.19 lbs
- Dimensions:
- 1 × 1 × 1 in
Information
Mount Barkbusters standard aluminum bar handguards to 1-1/8" motorcycle handlebars with the Barkbusters 1-1/8 inch (28.5mm) handlebar saddle clamp set.
- SKU:
- BB.BSS-00
- Brand:
- Barkbusters
- Weight:
- 0.19 lbs
- Dimensions:
- 1 × 1 × 1 in
Information
Saddle clamps for adapting Barkbusters Handguards to 25.5mm - 26.5mm tapered handlebars.
- SKU:
- BB.BSS-02
- Brand:
- Barkbusters
- Weight:
- 0.21 lbs
- Dimensions:
- 1 × 1 × 1 in
Information
Protect the aluminum backbone of your Barkbusters handguards from minor crashes and tip overs with these plastic skidplates.
- SKU:
- BB.BHG2
- Brand:
- Barkbusters
- Weight:
- 0.11 lbs
- Dimensions:
- 1 × 1 × 1 in
Information
Designed for use with complete kits for fitment to Aprilia Pegaso. KTM models with (1) Magura or Renthal handlebars AND (2) Brembo clutch activators. Optional part for KTM models with Brembo clutch master cylinder. Increases clearance around the clutch or brake hose area. Can also be used to increase clearances where brake and clutch lines are in the way.
- SKU:
- BB.B54
- Brand:
- Barkbusters
- Weight:
- 0.07 lbs
- Dimensions:
- 1 × 1 × 1 in
BB.BHG4*
$32.99 USD
Free Delivery on orders over $50
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
Replace the wind deflectors on your VPS handguards with Barkbusters VPS variable height replacement wind deflectors.
- SKU:
- BB.BHG4
- Brand:
- Barkbusters
- Weight:
- 0.175 lbs
- Dimensions:
- 1 × 1 × 1 in
- Color:
Information
Fits BB.BHG7 handguard model only. Not for use with BB.BHG1 or BB.BHG8 handguard models.
- SKU:
- BB.BHG7-UMK
- Brand:
- Barkbusters
- Weight:
- 0.5 lbs
- Dimensions:
- 1 × 1 × 1 in
BB.JET03*
$43.99 USD
Free Delivery on orders over $50
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
The Barkbusters replacement JET plastics are an excellent option for freshening up your existing plastics or adding a little color to your rig. Impact resistant durability adds safety for protecting your hands handlebar and controls from bugs stones and other debris. These low profile plastics are a great option for summertime riding where extensive coverage isn't necessary so your hands get plenty of airflow. In
...
BB.B-087.P*
$43.99 USD
Free Delivery on orders over $50
Non-stock Item
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
SABRE single point mount (open ended) handguard.
- SKU:
- BB.B-087.P
- Brand:
- Barkbusters
- Weight:
- 3 lbs
- Dimensions:
- 1 × 1 × 1 in
- Color:
HI-VIZ YELLOW, Black, Blue, Green, Orange, Red, White, Yellow
- Style:
BB.EGO-204-00.P*
$43.99 – $131.99 USD
Free Delivery on orders over $50
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
“ AUSTRALIAN MADE – “Aussie Made Aussie Tough” Our strongest handguard EVER! Designed for Mini Bikes, 80cc & Fun Bikes with OEM (Original Equipment Manufacturer) specifications. Also fits KTM 65 SX. To fit Mini Bikes with 22mm (7/8″) handlebar. Two mounting points secure the full wrap around aluminium design. Compact curved profile to protect hands […]
- SKU:
- BB.EGO-204-00.P
- Brand:
- Barkbusters
- Weight:
- 1 lbs
- Dimensions:
- 1 × 1 × 1 in
- Color:
Black on Black, Yellow Hiviz, Black, Blue, Green, Orange, Red, White, Yellow
BB.SAB-1*
$45.90 – $50.99 USD
Free Delivery on orders over $50
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
Enhance the comfort, safety and style of your motorcycle with a set of SABRE MX Enduro handguards from Barkbusters.
- SKU:
- BB.SAB-1
- Brand:
- Barkbusters
- Weight:
- 3 lbs
- Dimensions:
- 1 × 1 × 1 in
- Color:
Black/Blue, Black/Green, Black/Hi-Viz, Blue/White, Green/White, Hi-Viz/Black, Orange/White, Red/White, Yellow/Black, Black/Orange, Black/Pink, Black/Red, Black/Yellow, White/White, Black/Black
Information
For use with Barkbusters VPS handguards (BB.BHG6 and BB.S4 models ONLY) with full-wrap aluminum backbone.
- SKU:
- BB.BSC.STD
- Brand:
- Barkbusters
- Weight:
- 0.62 lbs
- Dimensions:
- 1 × 1 × 1 in
Information
Bar end weights required for installation of Barkbusters VPS full-wrap aluminum hand guards on Kawasaki Versys 650 '07-'09.
- SKU:
- BB.B56
- Brand:
- Barkbusters
- Weight:
- 0.5 lbs
- Dimensions:
- 1 × 1 × 1 in
BB.ES3*
Closeout
$49.99 USD
Free Delivery on orders over $50
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
Information
Replace the bars for your motorcycle's Barkbusters EGO Handguards. EGO lever protection by Barkbusters provide a close fit in order to enable tighter trail riding. EGO Handguards are ideal for Enduro, Trail and mini bikes but are not suitable for motorbikes with full length levers due to the narrow clearances provided by the smaller profile.
- SKU:
- BB.ESB
- Brand:
- Barkbusters
- Weight:
- 1.01 lbs
- Dimensions:
- 1 × 1 × 1 in
BB.BHG7*
Closeout Sale
$50.96 – $72.17 USD
Free Delivery
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
Protect your hands and levers during your next race with Barkbusters VPS Motocross handguards. Open ended for competition motocross motorcycles with high impact VPS guards and heat treated aluminum mounting frames these MX guards will protect your hands and levers from roosted rocks and debris. Ride harder with Barkbusters VPS Motocross handguards.
- SKU:
- BB.BHG7
- Brand:
- Barkbusters
- Weight:
- 1.042 lbs
- Dimensions:
- 1 × 1 × 1 in
- Color:
Black on Black, Hi-Viz, Black, Blue, Green, Orange, Pink, White, Yellow
Information
Increase student confidence & protect levers grips and handlebars. The Barkbusters lever guards for training bikes are an essential ally in protecting the most vulnerable parts during drops and crashes. Special Discounts are available for motorcycle training fleets.
- SKU:
- BB.BLG-05
- Brand:
- Barkbusters
- Tags:
- Presidents Day Sale, Valentines Day Sale
- Weight:
- 1.4 lbs
- Dimensions:
- 1 × 1 × 1 in
BB.S3*
$54.99 USD
Free Delivery
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
Maximize your wind protection with the Barkbuster's largest handguard plastic! For use with single sided Storm mount and all Barkbusters Handguards with VPS backbone.
- SKU:
- BB.S3
- Brand:
- Barkbusters
- Weight:
- 1 lbs
- Dimensions:
- 1 × 1 × 1 in
- Color:
BB.SAB-1BK-01.P*
Closeout
$54.99 USD
Free Delivery
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
These Barkbusters VPS handguards provide protection for your hands and controls defending them from wind weather stones and other debris.
- SKU:
- BB.SAB-1BK-01.P
- Brand:
- Barkbusters
- Weight:
- 3 lbs
- Dimensions:
- 1 × 1 × 1 in
- Color:
Black/Blue, Black/Green, Black/Hi-Viz, Blue/White, Green/White, Hi-Viz/Black, Orange/White, Red/White, Yellow/Black, Black/Orange, Black/Pink, Black/Red, Black/Yellow, White/White, Black/Black
- Style:
BB.BTC.00
$60.99 USD
Free Delivery
Non-stock Item
Add to cart-
Information
Barkbusters mounting hardware for mounting to 28.5mm (1-1/8in) handlebars.
- SKU:
- BB.BTC.00
- Brand:
- Barkbusters
- Weight:
- 0.62 lbs
- Dimensions:
- 1 × 1 × 1 in
Information
Barkbusters VPS Aluminum Bar Lever Protection Replacement Handguards
- SKU:
- BB.BHG5
- Brand:
- Barkbusters
- Weight:
- 2 lbs
- Dimensions:
- 1 × 1 × 1 in
Information
Replacement hardware mounting kit for mounting Barkbusters aluminum bar handguards to tapered motorcycle handlebars
- SKU:
- BB.BTC.06
- Brand:
- Barkbusters
- Weight:
- 0.77 lbs
- Dimensions:
- 1 × 1 × 1 in
BB.BHG3*
Best Seller
$60.99 USD
Free Delivery
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
Replace the deflectors on your aluminum bar backbones with Barkbusters VPS wind protection replacement handguards. For use with VPS or Storm style handguard models. Available in all standard Barkbusters handguard colors.
- SKU:
- BB.BHG3
- Brand:
- Barkbusters
- Tags:
- Presidents Day Sale, Valentines Day Sale
- Weight:
- 0.55 lbs
- Dimensions:
- 1 × 1 × 1 in
- Color:
Black on Black, Hi-Viz, Black, Blue, Green, Orange, Pink, Red, Silver, White, Yellow
BB.EGO-203-00.Parent*
$60.99 USD
Free Delivery
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
AUSTRALIAN MADE – “Aussie Made Aussie Tough” EGO plastic guards only. To fit Barkbusters EGO aluminium backbone. (New design plastic guard fits on current backbone.) Left and right pair with mounting screws. High impact resistant plastic guards. Compact curved profile to protect hands and levers during intense trail and tight bush riding. Top vents for […]
- SKU:
- BB.EGO-203-00.Parent
- Brand:
- Barkbusters
- Weight:
- 1 lbs
- Dimensions:
- 1 × 1 × 1 in
- Color:
HIVIZ, Black, Blue, Green, Orange, Red, White, Yellow, Black/Black
Information
The risers are placed between the fork crown and the handlebars to raise the bars up 4/5" (20mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables wiring or hoses. This is the same handlebar riser kit included in the VPS handguards for the BMW F650GS & F650GS/Dakar '00-'07.
- SKU:
- BB.B55
- Brand:
- Barkbusters
- Weight:
- 0.56 lbs
- Dimensions:
- 1 × 1 × 1 in
Information
Add 180 grams of mass to the end of each of your handlebars to reduce vibration. Barkbuster Bar End Weights are compatible with full-wrap Storm and VPS hand guards. They will not mount to the motorcycle by themselves they work in conjunction with Barkbuster full wrap hand guards.
- SKU:
- BB.B66
- Brand:
- Barkbusters
- Weight:
- 1.19 lbs
- Dimensions:
- 1 × 1 × 1 in
BB.BC-28
$72.99 USD
Free Delivery
Low stock
Add to cart-
Information
Barkbusters 28.5mm Adapter To Fit Barkbusters VS-Bar To Triumph Tiger 1050
- SKU:
- BB.BC-28
- Brand:
- Barkbusters
- Weight:
- 1 lbs
- Dimensions:
- 1 × 1 × 1 in
Information
Fits most bikes with front or side-top triple clamp pinch bolts. Does not fit KTM or Husaberg models.
- SKU:
- BB.TCM
- Brand:
- Barkbusters
- Weight:
- 0.9 lbs
- Dimensions:
- 1 × 1 × 1 in
BB.LED-001-02-AM
$76.99 USD
Free Delivery
Available to backorder
Add to cart-
Information
The Barkbuster LED Indicator Lights for Jet Storm & VPS Plastic Handguards to increase your visibility and safety using 15 high intensity LEDs that mount directly to the plastic handguard shells. Super bright auxiliary signals will make your directional intentions clear to upcoming traffic. The LED indicators are very low draw and E marked for road use.
- SKU:
- BB.LED-001-02-AM
- Brand:
- Barkbusters
- Weight:
- 0.25 lbs
- Dimensions:
- 1 × 1 × 1 in
BB.LED-002-02-WH
$76.99 USD
Free Delivery
In stock
Add to cart-
Information
The Barkbuster LED Indicator Lights for Jet Storm & VPS Plastic Handguards are designed to increase your visibility using 15 super bright white LEDs that mount directly to the plastic handguards. Super bright auxiliary running lights will make your presence clear to upcoming traffic. The LED indicators are very low draw and E marked for road use.
- SKU:
- BB.LED-002-02-WH
- Brand:
- Barkbusters
- Weight:
- 0.42 lbs
- Dimensions:
- 1 × 1 × 1 in
Information
Barkbusters Single Point Inner Bar Clamp Mount Handguard Hardware Kit For 1in Handlebars | STM-002 No Plastics Provide protection for your motorcycle’s front brake and clutch controls with Barkbusters single point mount lever protection handguards. These handguards feature clamping hardware that attach to the inner portion of the handlebars leaving the bar ends clear. The guards are ...
- SKU:
- BB.S2-NP
- Brand:
- Barkbusters
- Weight:
- 2 lbs
- Dimensions:
- 1 × 1 × 1 in
Information
Barkbusters Single Point Inner Bar Clamp Mount Handguard Hardware Kit For 7/8in Handlebars | STM-001 No Plastics
Provide protection for your motorcycle’s front brake and clutch controls with Barkbusters single point mount lever protection handguards. These handguards feature clamping hardware that attach to the inner portion of the handlebars leaving the bar ends clear. The guards ar...
- SKU:
- BB.S1-NP
- Brand:
- Barkbusters
- Weight:
- 0.75 lbs
- Dimensions:
- 1 × 1 × 1 in
Information
Give beginner riders a boost of confidence with the Barkbusters Aluminum Bar Lever Protection Training Motorcycle Handguards. Heated treated aluminum bars with two mounting points on each side provide excellent strength to protect the lever on your motorcycle. Keep a tip-over from ending your ride with Barkbusters aluminum bar lever protection training handguards.
- SKU:
- BB.BLG-018
- Brand:
- Barkbusters
- Weight:
- 1.4 lbs
- Dimensions:
- 1 × 1 × 1 in
Information
Provide lever protection for your motorcycle’s front brake and clutch controls with Barkbusters aluminum bar lever protection handguards. Designed for motorcycles with 7/8 inch or 1-1/8 inch diameters the guards feature heat treated full wrap aluminum backbones that are mounted at two points on each side for strength. Prevent ride ending damage to your motorcycle with Barkbusters aluminum bar lever protection handgua...
- SKU:
- BB.BHG15-01
- Brand:
- Barkbusters
- Weight:
- 2.16 lbs
- Dimensions:
- 1 × 1 × 1 in
BB.BHG6*
$106.99 USD
Free Delivery
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
Barkbusters VPS handguards feature an aluminum back bone with a stylish replaceable plastic guard and variable-height wind deflectors to yield a truly functional handguard. Available in black blue green orange red silver white and yellow.
Information
Barkbusters Aluminum Bar Lever Protection Handguards | No Plastics
Provide protection for your motorcycle’s front brake and clutch controls with Barkbusters aluminum bar lever protection handguards. These handguards feature heat treated full wrap aluminum backbones that are mounted at two points on each side for strength. Prevent ride ending damage to your motorcycle with Barkbusters ...
- SKU:
- BB.BHG15-02
- Brand:
- Barkbusters
- Weight:
- 2.29 lbs
- Dimensions:
- 1 × 1 × 1 in
BB.JET01*
Best Seller
$115.99 USD
Free Delivery
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
Designed for dual sport enduro and trail motorcycles with 7/8in motorcycle handlebars the Barkbusters JET lever and wind protection handguards will keep a crash from ending your ride early. Easy to install heat treated aluminum backbones feature two mounting points to provide the strength needed to prevent lever damage. Impact resistant deflectors available in multiple colors provide protection for your hands fro...
BB.EGO-001-00.P*
$119.95 – $131.99 USD
Free Delivery
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
BB.ES4*
Closeout
$120.99 USD
Free Delivery
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
Designed for smaller displacement dirt and mini bikes the Barkbusters Mini EGO lever and wind protection handguards will keep crashes from ending your race. Easy to install heat treated aluminum backbones with two mounting points provide the strength needed to prevent lever damage. Impact resistant deflectors available in multiple colors provide protection for your hands from roosts and brush. Ride longer more c...
Information
The simple one-point assembly is carried out on the handlebar ends. The assembly material is included in the scope of delivery for both hollow handlebars and handlebars with a 6 or 8 mm internal thread. Discreet protectors to protect the clutch and brake levers Specifically developed for street and sports motorcycles Single-point mounting on hollow handlebar […]
- SKU:
- BB.AGP-001-01-BK
- Brand:
- Barkbusters
- Weight:
- 2.5 lbs
- Dimensions:
- 1 × 1 × 1 in
BB.BBZ-001-01-BK
$126.99 USD
Free Delivery
Available to backorder
Add to cart-
Information
Extend your comfortable riding season with Barkbusters BBZ cold weather protection handguards. Designed to fit with or without existing Barkbusters backbones or handlebar weights these guards offer superb wind protection without limiting access to your grips or controls. Simple to install they can be mounted or removed within ten minutes without permanent modifications. Ride with less bulky gloves in colder weather ...
- SKU:
- BB.BBZ-001-01-BK
- Brand:
- Barkbusters
- Weight:
- 2.14 lbs
- Dimensions:
- 1 × 1 × 1 in
BB.S1*
$126.99 USD
Free Delivery
Available to backorder
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
Provide weather and wind hand protection with Barkbusters STORM Single Point Clamp Mount Handguard Kit for 7/8 inch diameter handlebars.
- SKU:
- BB.S1
- Brand:
- Barkbusters
- Weight:
- 1.57 lbs
- Dimensions:
- 1 × 1 × 1 in
- Color:
BB.S2*
$126.99 USD
Free Delivery
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
Give your hands and levers a break with Barkbusters STORM Single Point Clamp Mount Handguard Kit for 1in Handlebars.
- SKU:
- BB.S2
- Brand:
- Barkbusters
- Weight:
- 1.57 lbs
- Dimensions:
- 1 × 1 × 1 in
- Color:
BB.S5.JET*
$126.99 USD
Free Delivery
Non-stock Item
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
Provide lightweight and cost effective protection for your hands with Barkbusters JET Single Point Bar End Mount Handguard Kit for motorcycles with 7/8in or 1in hollow handlebars. Impact resistant deflectors provide shelter for your hands from weather wind and light brush and are held securely in place with heat treated aluminum bars. Give your hands a break with a JET single point bar end mount handguard kit by Bark...
- SKU:
- BB.S5.JET
- Brand:
- Barkbusters
- Weight:
- 2.443 lbs
- Dimensions:
- 1 × 1 × 1 in
BB.S7.JET*
$126.99 USD
Free Delivery
Non-stock Item
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
Provide lightweight and cost effective protection for your hands with Barkbusters JET Single Point Bar End Mount Handguard Kit for motorcycles with 6mm & 8mm internally threaded bar ends. Impact resistant deflectors provide shelter for your hands from weather wind and light brush and are held securely in place with heat treated aluminum bars. Give your hands a break with a JET single point bar end mount handguard kit...
BB.JET02*
$131.99 USD
Free Delivery
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
Designed for dual sport enduro and trail motorcycles with tapered motorcycle handlebars the Barkbusters JET lever and wind protection handguards will keep drops from ending your ride early. Easy to install heat treated aluminum backbones with two mounting points provide the strength needed to prevent lever damage. Impact resistant deflectors available in multiple colors provide protection for your hands from bru...
Information
AUSTRALIAN MADE – “Aussie Made Aussie Tough” Designed specifically for the BMW F 900 GS (’24 on), BMW F 900 GS ENDURO (’24 on) with OEM (Original Equipment Manufacturer) specifications. Two mounting points secure the full wrap around aluminium design. Heat treated aluminium backbone for added strength and impact protection. Easy installation. Hardware Kit only […]
- SKU:
- BB.BHG-115-00-NP
- Brand:
- Barkbusters
- Tag:
- Composite
- Weight:
- 2 lbs
- Dimensions:
- 1 × 1 × 1 in
Information
AUSTRALIAN MADE – “Aussie Made Aussie Tough” Designed specifically for the KAWASAKI KLR650 (’22 on) with OEM (Original Equipment Manufacturer) specifications. Two mounting points secure the full wrap around aluminium design. Heat treated aluminium backbone for added strength and impact protection. Bar end weights included. Easy installation. Hardware Kit only (NO plastic guards). Compatible with […]
- SKU:
- BB.BHG-092-00-NP
- Brand:
- Barkbusters
- Tags:
- Presidents Day Sale, Valentines Day Sale
- Weight:
- 2.29 lbs
- Dimensions:
- 1 × 1 × 1 in
BB.BHG-099-00-P*
Sale
Original price was: $159.85.$135.88Current price is: $135.88. USD
Free Delivery
Available to backorder
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
These Barkbusters VPS HandGuards are designed to protect your hands from whatever nature dishes out during your ride. Wind rain bad weather stones bugs and other projectiles are deflected to protect your hands and maximize riding comfort. The handguards also protect your brake lever from being activated accidentally when riding in groups or in tight trails where objects can brush against your handlebar. In the...
Information
Give your hands and levers a break with Barkbusters Storm S7 wind and weather protection handguards for 6mm or 8mm internal threaded handlebars. These guards are designed to provide you comfort when riding in the elements or through narrow trails where brush can scrape up your hands or whack your levers. When you mount these motorcycle handguards for wind protection on your bike you will also enjoy not be...
- SKU:
- BB.STM-007-02-BK
- Brand:
- Barkbusters
- Weight:
- 2.27 lbs
- Dimensions:
- 1 × 1 × 1 in
BB.S5*
$137.99 USD
Free Delivery
Available to backorder
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
The Barkbusters STORM Single Point Bar End Mount Handguard Kit for 7/8in or 1in Hollow Handlebars - STM-005 provide wind weather and debris protection for your hands. A tough aluminum backbone bolts to each side of the bar to securely support aerodynamic plastics that create a “protective pocket” for each hand. The plastic deflectors and rigid backbones transform your exposed handlebar into a friendlier cockpit that ...
- SKU:
- BB.S5
- Brand:
- Barkbusters
- Weight:
- 2.335 lbs
- Dimensions:
- 1 × 1 × 1 in
- Color:
BB.BHG790JET-BK.P*
$137.99 – $181.99 USD
Free Delivery
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
The Barkbusters JET lever and wind protection handguards were made for the enduro and off-road enthusiasts. The last thing you need is to snap a clutch lever 10 miles into a trail. These essential guards will keep a crash from ending your ride early. Easy to install heat treated aluminum backbones feature two mounting points to provide the strength needed to prevent lever damage. Impact resistant deflectors availabl...
BB.S5.VPS*
$137.99 USD
Free Delivery
Non-stock Item
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
Provide lightweight and cost effective protection for your hands with Barkbusters VPS Single Point Bar End Mount Handguard Kit for motorcycles with 7/8in or 1in hollow handlebars. High impact resistant deflectors provide shelter for your hands from weather wind and light brush and are held securely in place with heat treated aluminum bars. Protect your hands with a VPS single point bar end mount handguard kit by Bark...
- SKU:
- BB.S5.VPS
- Brand:
- Barkbusters
- Weight:
- 2.55 lbs
- Dimensions:
- 1 × 1 × 1 in
- Color:
BB.S7.VPS*
$137.99 USD
Free Delivery
Non-stock Item
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
Provide lightweight and cost effective protection for your hands with Barkbusters VPS Single Point Bar End Mount Handguard Kit for motorcycles with 6mm & 8mm Internal threaded bar ends. High impact resistant deflectors provide shelter for your hands from weather wind and light brush and are held securely in place with heat treated aluminum bars. Protect your hands with a VPS single point bar end mount handguard kit b...
BB.EGO-201-00.P*
$137.99 USD
Free Delivery
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
“AUSTRALIAN MADE – “Aussie Made Aussie Tough” Our strongest handguard EVER! Designed for Enduro and Trail bikes. To fit straight 22mm (7/8″) handlebar. Two mounting points secure the full wrap around aluminium design. Compact curved profile to protect hands and levers during intense trail and tight bush riding. Heat treated aluminium backbone for maximum strength. […]
- SKU:
- BB.EGO-201-00.P
- Brand:
- Barkbusters
- Weight:
- 1 lbs
- Dimensions:
- 1 × 1 × 1 in
- Color:
Black on Black, Yellow Hiviz, Black, Blue, Green, Red, White, Yellow
BB.EGO-205-00.Parent*
$137.99 USD
Free Delivery
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
AUSTRALIAN MADE – “Aussie Made Aussie Tough” Our strongest handguard EVER! Designed for Enduro and Trail bikes. To fit tapered handlebar. NOTE: will not fit Renthal Twin Wall or Barkbusters VSBar. Two mounting points secure the full wrap around aluminium design. Compact curved profile to protect hands and levers during intense trail and tight bush […]
- SKU:
- BB.EGO-205-00.Parent
- Brand:
- Barkbusters
- Weight:
- 1 lbs
- Dimensions:
- 1 × 1 × 1 in
- Color:
HIVIZ, Black, Blue, Green, Orange, Red, White, Yellow, Black/Black
BB.ES1*
$142.99 USD
Free Delivery
Non-stock Item
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
Designed for enduro motocross trail and mini bikes with 7/8 inch motorcycle handlebars the Barkbusters EGO lever and wind protection handguards will keep crashes from ending your race early. Easy to install heat treated aluminum backbones with two mounting points provide the strength needed to prevent lever damage. Impact resistant deflectors available in multiple colors provide protection for your hands from roosts and brush. Ride harder and longer with Barkbusters EGO lever and wind protection handguards.
- SKU:
- BB.ES1
- Brand:
- Barkbusters
- Weight:
- 1 lbs
- Dimensions:
- 1 × 1 × 1 in
- Color:
BB.EGO-005-02.P*
$142.99 USD
Free Delivery
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
BB.BHG-063.ST.P*
Closeout
$144.85 USD
Free Delivery
Not currently available to order
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
Protect the levers on your motorcycle as well as your hands from the wind and rain with Barkbusters Storm Lever and Wind Protection Handguards for Honda Grom MSX125 and Kawasaki Z125 PRO. With full wrap heat treated aluminum backbones two mounting points on each side and impact resistant Storm deflectors these lever guards are built to protect from more than just the elements. Keep an unexpected drop or inclement w...
- SKU:
- BB.BHG-063.ST.P
- Brand:
- Barkbusters
- Weight:
- 3.07 lbs
- Dimensions:
- 1 × 1 × 1 in
- Color:
Information
Provide light protection for your motorcycle's levers with Barkbusters Aluminum Bar Single Point Bar End Mount Handguard Kit for motorcycles with 7/8 inch or 1 inch hollow handlebars. Add a set of Barkbusters JET VPS STORM or CARBON guards to provide wind and weather protection or to simply finish the look. Give your motorcycle the insurance it deserves with an aluminum bar single point bar end mount handguard kit b...
- SKU:
- BB.STM-005-02-NP
- Brand:
- Barkbusters
- Tag:
- Composite
- Weight:
- 2 lbs
- Dimensions:
- 1 × 1 × 1 in
BB.STM-007-02-NP
$148.98 USD
Free Delivery
Available to backorder
Select options-
Information
Provide light protection for your motorcycle's levers with Barkbusters Aluminum Bar Single Point Bar End Mount Handguard Kit for motorcycles with 6mm & 8mm internally threaded bar ends. Add a set of Barkbusters JET VPS STORM or CARBON guards to provide wind and weather protection or to simply finish the look. Give your motorcycle the insurance it deserves with an aluminum bar single point bar end mount handguard kit...
- SKU:
- BB.STM-007-02-NP
- Brand:
- Barkbusters
- Tag:
- Composite
- Weight:
- 1.54 lbs
- Dimensions:
- 1 × 1 × 1 in
BB.BHG15-1*
$148.99 USD
Free Delivery
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
Keep your hands and controls protected from the wind and impact with Barkbusters VPS lever and wind protection handguards. Designed specifically for motorcycles with 7/8in handlebars the heat treated aluminum backbones with two mounting points of these handguards provide the strength needed to prevent a tip-over from ending your motorcycle ride. Impact resistant deflectors available in multiple colors provide prote...
- SKU:
- BB.BHG15-1
- Brand:
- Barkbusters
- Weight:
- 2.71 lbs
- Dimensions:
- 1 × 1 × 1 in
- Color:
BB.BHG-061-00.ST.P*
Closeout
$149.85 USD
Free Delivery
Not currently available to order
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
Barkbusters Storm lever and weather protection handguards are designed to deflect projectiles and shield your hands and controls from the rain and wind. A secure two point mounting system offers rigid mounting for each aluminum heat treated full wrap backbone bar. Generous impact resistant plastic guards shed wind and deflect rain allowing your hands to be more comfortable in lousy weather. Ride longer with Storm ha...
- SKU:
- BB.BHG-061-00.ST.P
- Brand:
- Barkbusters
- Weight:
- 2.73 lbs
- Dimensions:
- 1 × 1 × 1 in
- Color:
BB.BHG-063*
Closeout
$149.85 USD
Free Delivery
Not currently available to order
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
Protect the levers on your motorcycle as well as your hands with Barkbusters VPS Lever and Wind Protection Handguards for Honda Grom MSX125 and Kawasaki Z125 PRO. With full wrap heat treated aluminum backbones two mounting points on each side and high impact resistant VPS deflectors these lever guards are built to protect. Keep an unexpected drop from ending your ride with VPS Lever and Wind Protection Handguards b...
BB.ES5.2*
$150.99 USD
Free Delivery
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
Designed for enduro motocross trail and mini bikes with tapered motorcycle handlebars the Barkbusters EGO lever and wind protection handguards will keep crashes from ending your race early. Easy to install heat treated aluminum backbones with two mounting points provide the strength needed to prevent lever damage. Impact resistant deflectors available in multiple colors provide protection for your hands from roosts and brush. Ride harder and longer with Barkbusters EGO lever and wind protection handguards.
- SKU:
- BB.ES5.2
- Brand:
- Barkbusters
- Weight:
- 1 lbs
- Dimensions:
- 1 × 1 × 1 in
- Color:
BB.BHG-061-00*
Closeout
$154.85 USD
Free Delivery
Available to backorder
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
Protect your levers and hands from impact with Barkbusters VPS lever & wind protection handguards. Whether you are planning on riding the Africa Twin through extreme terrain or across gentle highways these hand protectors will insure against damage to your levers and hands due to direct impact. With solid heat treated aluminum backbone bars secure two point mounting systems and tough yet stylish plastic wind and br...
BB.BHG085JET.P*
$154.90 – $164.99 USD
Free Delivery
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
BB.BHG-VER*
$157.70 – $199.99
Free Delivery
Available to backorder
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
Information
Barkbusters Reinforced Handguard Kit for Ducati Multistrada 1200 work in conjunction with the standard Ducati handguard set up and provide impact protection without changing the looks of your motorcycle.
- SKU:
- BB.BLG-13
- Brand:
- Barkbusters
- Weight:
- 2.38 lbs
- Dimensions:
- 1 × 1 × 1 in
BHG-067-JET*
$164.99 USD
Free Delivery
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
The Barkbusters JET lever and wind protection handguards were made for the enduro and off-road enthusiasts. The last thing you need is to snap a clutch lever 10 miles into a trail. These essential guards will keep a crash from ending your ride early. Easy to install heat treated aluminum backbones feature two mounting points to provide the strength needed to prevent lever damage. Impact resistant deflectors availabl...
BB.BHG083JET.P*
$164.99 USD
Free Delivery
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
The Barkbusters JET lever and wind protection handguards were made for the enduro and off-road enthusiasts. The last thing you need is to snap a clutch lever 10 miles into a trail. These essential guards will keep a crash from ending your ride early. Easy to install heat treated aluminum backbones feature two mounting points to provide the strength needed to prevent lever damage. Impact resistant deflectors availabl...
BB.BHG084JET.P*
$164.99 USD
Free Delivery
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
The Barkbusters JET lever and wind protection handguards were made for the enduro and off-road enthusiasts. The last thing you need is to snap a clutch lever 10 miles into a trail. These essential guards will keep a crash from ending your ride early. Easy to install heat treated aluminum backbones feature two mounting points to provide the strength needed to prevent lever damage. Impact resistant deflectors availabl...
BB.BHG080JET.P*
$164.99 USD
Free Delivery
Non-stock Item
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
The Barkbusters JET lever and wind protection handguards were made for the enduro and off-road enthusiasts. The last thing you need is to snap a clutch lever 10 miles into a trail. These essential guards will keep a crash from ending your ride early. Easy to install heat treated aluminum backbones feature two mounting points to provide the strength needed to prevent lever damage. Impact resistant deflectors availabl...
BB.BHG086JET.P*
$164.99 USD
Free Delivery
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
BB.BHG087JET.P*
Closeout
$164.99 USD
Free Delivery
Not currently available to order
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
BB.BHG088JET.P*
$164.99 USD
Free Delivery
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
BB.BHG089JET.P*
$164.99 USD
Free Delivery
Non-stock Item
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
BB.BHG153JET.P*
$164.99 USD
Free Delivery
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
BB.BHG-060.ST.P*
$170.99 USD
Free Delivery
In stock
Choose Options This product has multiple variants. The options may be chosen on the product page-
Information
Provide comfort for your hands and the levers on your motorcycle with the Barkbusters Storm lever and weather protection handguards. Full wrap solid aluminum bars with a secure two point mounts provide a support backbone behind attractive and generous projectile-resistant plastic guards. Ride longer with the Storm handguards and complete mounting kit by Barkbusters.
- SKU:
- BB.BHG-060.ST.P
- Brand:
- Barkbusters
- Weight:
- 2.73 lbs
- Dimensions:
- 1 × 1 × 1 in
- Color:
The ORIGINAL Motorcycle Handguards by Barkbusters!
The toughest, most functional motorcycle handguard protection on the planet.