Improve visibility with the line of powerful LED light systems and the ridiculously loud Soundbomb line of horns. The blazing light output from each rugged and highly efficient light system will significantly increase your ability to see and be seen. Put out an amazing amount of light with minimal power draw designed specifically for the limited output capabilities of a motorcycle. Additionally DENALI developed the SoundBomb line of extremely loud horns that command attention from careless drivers. No matter what motorcycle you ride, DENALI Electronics has the lights, horns and mounts to increase your capability, visibility and safety!
This MT Series DENALI 2-Pin Male Waterproof Connector Pigtail can be used to adapt other brands of lighting or accessories to the DENALI CANsmart Controller. The connector is pre-assembled with 3 inch 18 AWG wires exiting the connector which can be soldered onto the light or accessory of your choice.
These premium MT Series Waterproof Connectors are used in the DENALI 2.0 lights and harnesses. The kit includes both the male and female connector crimp-on terminals as well as waterproofing wire seals. Using an affordable crimping tool these connectors can be crimped onto wires in seconds to modify customize or replace electrical connections.
These premium MT Series Waterproof Connectors are used in the DENALI 2.0 lights and harnesses. The kit includes both the male and female connector crimp on terminals as well as waterproofing wire seals. Using an affordable crimping tool these connectors can be crimped onto wires in seconds to modify customize or replace electrical connections.
The Denali Interlink Pod Adapter allows you to link up to 4 Denali D1 Pods to each other with the integrated linking channel designed into the Denali D1 housing.
Use this DENALI Wiring Adapter to easily connect a set of DRLs to a DENALI Auxiliary Light Harness or CANsmart Controller. The pass through design allows the DRL Lights to be added to the light circuit in addition to the Auxiliary LED Lights.
This DENALI MT Series 3-Pin Male waterproof connector pigtail can be used to adapt other brands of lighting or accessories to the DENALI CANsmart Controller or DENALI 2.0-series Premium Wiring Harness. The connector is pre-assembled with 3 inch 18 AWG wires exiting the connector which can be soldered onto the light or accessory of your choice.
These premium MT Series Waterproof Connectors are used in the DENALI 2.0 lights and harnesses. The kit includes both the male and female connector crimp-on terminals as well as waterproofing wire seals. Using an affordable crimping tool these connectors can be crimped onto wires in seconds to modify customize or replace electrical connections.
These 3-Pin Waterproof Blanking Caps can be used to cover and protect the unused leads of your DialDim Controller or CANsmart Controller. What’s In The Box? (x2) 3-Pin Waterproof Blanking Caps
These premium MT Series Waterproof Connectors are used in the DENALI 2.0 lights and harnesses. The kit includes both the male and female connector crimp-on terminals as well as waterproofing wire seals. Using an affordable crimping tool these connectors can be crimped onto wires in seconds to modify customize or replace electrical connections.
The DENALI power switch eliminator plug for 1st generation single & dual intensity harnesses replaces the original on/off button so your lights will automatically power on and off with the motorcycle's ignition. Enjoy the convenience of having your lights on anytime your bike is running and peace of mind knowing they will be off with the ignition. This handy eliminator plug is very easy to install, simply remove the power button that was included with the kit and plug the switch eliminator in. Designed and engineered in the USA. Simplify your 1st generation LED light kit with the power switch eliminator plug from DENALI!
This DENALI MT Series 3-Pin Female Waterproof Connector Pigtail can be used to to modify, customize, or replace electrical connections. The connector is pre-assembled with 3 inch 18 AWG wires exiting the connector which can be soldered onto the light or accessory of your choice. Note: Crimp-on 3-Pin Connector Sets are also available for purchase. What’s […]
The DENALI Y-Splitter powers two DENALI B6 or DRL LED lights from one harness! Use it to remove the mess from your wiring and make installation a breeze. Plug-n-play connectors simply plug into both DENALI DRL/B6 lights (sold separately) which can then be tapped into your power source. Enhance your DENALI B6 / DRL installation and pick up a Y-Splitter before your next ride.
These premium MT Series Waterproof Connectors are used in the DENALI 2.0 lights and harnesses. The kit includes both the male and female connector crimp-on terminals as well as waterproofing wire seals. Using an affordable crimping tool these connectors can be crimped onto wires in seconds to modify customize or replace electrical connections.
This  D3 E-Mark & SAE/DOT Approved Hybrid Lens is an replacement for the hyrbid lens of a D2 light pod. What’s In The Box? (x1)  D3 E-Mark & SAE/DOT Approved Hybrid Lens
This D3 E-Mark & SAE/DOT Approved Fog Lens is an replacement for the fog lens of a D3 light pod. What’s In The Box? (x1) D3 E-Mark & SAE/DOT Approved Fog Lens
This DENALI Harness Extension can be used to extend the lead of your B6 or DRL light by 48 inches. Equipped with one male and one female miniature three-pin connector at each end the harness lovingly encircled in abrasion-resistant wrap for security and a clean-looking installation.
Use the DENALI wiring adapter for connecting DENALI B6 LED Brake Lights to the OEM KTM harness for a true plug & play connection. No wire tapping or other modifications to the original harness are necessary just plug directly into the factory connector to send the brake light signal from your motorcycle to the B6. This handy little adapter is all you need when connecting a B6 Brake Light to your KTM Adv...
This wiring adapter enables plug-&-play connection between our B6 Brake Light and the Honda Africa Twin 1100. To install, simply plug the white connector to the B6 and the remaining connector in line at the Africa Twin brake light. Click HERE to check out our pre-configured bundle that includes this adapter and a single or dual B6 brake light kit.Â
Package contains four 2amp four 3amp two 5amp two 7.5amp two 10amp and one 15 amp fuses for use in the PowerHub2 Power Distribution Module by Denali. Fuses will work in other products that use mini ATM fuses.
This wiring adapter enables plug-&-play connection between our Rear T3 Switchback Turn Signals and the KTM 1290 Adventure R/S. To install, simply plug the 6-pin connector in line at the 1290 rear turn signals /brake light connector – then connect the T3s. Click HERE to check out our pre-configured bundle that includes this adapter, the rear T3s and the license plate […]
This wiring adapter enables plug-&-play connection between our B6 Brake Light and the Harley-Davidson Pan America 1250. To install, simply plug the white connector to the B6 and the remaining connector in line at the Pan America brake light. Click HERE to check out our pre-configured bundle that includes this adapter and a single or dual B6 brake light kit.
This wiring adapter enables plug-&-play connection between our front T3 light pods and the factory front turn signal harness in the Africa Twin 1100. The kit includes a pair of color-coded adapters so installation couldn’t be any easier. When using this adapter for the Africa Twin 1100, the T3s will run amber as a DRL (just like the factory turn […]
Five pin relay for many automotive applications. Rated for 30-amps of 12-volt DC current. Offered as a replacement part for the Denali SoundBomb Compact Dual-Tone Air Horn.
Made from heavy-duty 3mm thick 1-inch (26mm) wide strips of steel. Inner hole diameter is 5/16-inch (8mm). Center-to-center hole distance is 3 inches overall length of bracket is 4 inches. Powder-coated flat black. Sold each.
The DENALI L bracket accessory mount 2.5" black is great for mounting various accessories to your motorcycle. High strength stamped steel is 1" wide 3mm in thickness and two and a half inches in length. This useful bracket is powder coated in an attractive semi matte black finish to increase durability and corrosion resistance. Great for use when fitting horns lights device mounts and anything else you need to f...
DENALI Slip-On Blackout Covers keep your bike street legal in states that require aftermarket lighting to be covered on public roads. Once you get to the trails, slip the covers off of your DENALI D4 lights and go. The rugged silicone construction of the Slip-On Covers protect from rocks and other debris, providing an even longer […]
DENALI Slip-On Blackout Covers keep your bike street legal in states that require aftermarket lighting to be covered on public roads. Once you get to the trails, slip the covers off of your DENALI S4 lights and go. The rugged silicone construction of the Slip-On Covers protect from rocks and other debris, providing an even longer […]
DENALI Slip-On Blackout Covers keep your bike street legal in states that require aftermarket lighting to be covered on public roads. Once you get to the trails, slip the covers off of your DENALI D3 lights and go. The rugged silicone construction of the Slip-On Covers protects you from rocks and other debris, providing an even […]
This wiring adapter enables plug-&-play connection between our B6 Brake Light and the Kawasaki KLR650. To install, simply plug the white connector to the B6 and the remaining connector in line at the Africa Twin brake light. Click HERE to check out our pre-configured bundle that includes this adapter and a single or dual B6 brake light kit.Â
The DENALI switched power adapter connects to your Kawasaki KLR650’s factory accessory power port and provides a switched 12V power source for triggering electronic accessories. The plug-&-play connection means you will not have to tap, pierce, cut, or solder any original wires. The KLR650’s accessory power port is switched with the ignition, so it will provide power […]
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Our industry-first, patent-pending, X-Lens is the core innovation that makes our D14 Destroyer Headlight the most unique and versatile headlight ever released. Simply snap the modular X-Lens on to our Destroyer headlight to change the color of the center low beam to amber or selective yellow. Yes, it looks completely bad-ass, but arguably more important, […]
The DENALI Power Switch Eliminator plug replaces the standard On-Off switch so your lights will automatically power on and off with the vehicle's ignition. Enjoy the convenience of having your lights on any time your bike is running and peace of mind knowing they will turn off with the ignition.
This mounting kit provides a waterproof gasket and all necessary hardware for installing a DENALI DRL or B6 Visibility Pod to any flat surface. Use this mounting kit to install DRLs to body panels and hand guards or mount B6 brake light pods directly to your rear bumper or on the back of your luggage cases.
These low-profile mounting adapters are made from durable gloss back ABS and allow you to seamlessly mount T3 Signal Pods to 1.25" engine guards or crashbars commonly found on cruiser motorcycles.
If you are tired of not being seen by motorists ensure that they will hear you by installing a horn that turn heads with the DENALI horn mounting bracket for BMW K1600GT. Designed specifically to mount the DENALI SoundBomb Split Dual-Tone Air Horn to your motorcycle this bracket allows repl
...
Use the DENALI wiring adapter for connecting SoundBomb horns to the OEM BMW harness for a true plug & play connection. No wire tapping or other modifications to the original harness are necessary just plug directly into the factory connector to send triggered power from your motorcycle. This handy little adapter is all you need when connecting a SoundBomb Mini...
Turn load resistors are necessary to prevent hyper flashing of the signals when swapping from incandescent to LED turns signals. Use these 20 Ohm Load Resistors to replace your original 10 Watt Turn Signals with DENALI Flush Mount Micro Turn Signals. Please Note: You will need one resistor for each turn signal being ins...
Use this CANbus Pass-Through when installing our CANsmartâ„¢ Controller to a Harley-Davidson Motorcycle that has an existing aftermarket accessory that also plugs into the diagnostic port. The cable splits the diagnostic port allowing both the CANsmartâ„¢ and a second accessory to be connected bikes CAN bus.
Use this Micro Turn Signal Spacer Kit to offset the Micro Turn Signals (designed in collaboration with Analog Motorcycles) one inch from the mounting surface.
Use this DENALI T3 Wiring Adapter for plug and play connection of DENALI Front T3 Lights to Harley-Davidson Motorcycles. The adapter simply plugs inline between the factory front turn signals.
DENALI Slip-On Blackout Covers keep your bike street legal in states that require aftermarket lighting to be covered on public roads. Once you get to the trails, slip the covers off of your DENALI D7 or D7 Pro lights and go. The rugged silicone construction of the Slip-On Covers protect from rocks and other debris, […]
The long-awaited Trigger Wizard is a simple wiring adapter that converts a ground-switched vehicle high beam wire to a traditional high beam wire that outputs 12 volts when you turn on your high beam.
This wiring adapter enables plug-&-play connection between our DENALI DM, D2 and DR1 LED light pods and the factory fog light harness in the Africa Twin 1100. The kit includes a pair of adapters as well as our version of the red Honda Service Plug (Data Link Connector) which you will need to enable the fog light […]
This neck tube is a versatile accessory that can be used as a face covering, headband, bandana, wristband, and neck warmer. • 95% polyester, 5% elastane • Breathable fabric • Washable and reusable • Four-way stretch fabric that stretches and recovers on the cross and lengthwise grains • One size
DENALI is the only brand that can provide a complete motorcycle lighting and visibility package that includes the lights, light mounts, horn, horn mount, auxiliary brake lights, and a single intelligent plug-n-play controller to provide effortless installation and integrated control of all your accessories.
DENALI 2.0 auxiliary lights deliver industry leading performance with innovative features like integrated dimming and swap-able lens options. Whether your venturing off road at night, or simply want to be more visible to other motorists during the day, DENALI’s robust line of lighting, horns and accessory management makes riding safer and installation easier.
