Improve visibility with the line of powerful LED light systems and the ridiculously loud Soundbomb line of horns. The blazing light output from each rugged and highly efficient light system will significantly increase your ability to see and be seen. Put out an amazing amount of light with minimal power draw designed specifically for the limited output capabilities of a motorcycle. Additionally DENALI developed the SoundBomb line of extremely loud horns that command attention from careless drivers. No matter what motorcycle you ride, DENALI Electronics has the lights, horns and mounts to increase your capability, visibility and safety!
Constructed from black anodized billet aluminum for strength and durability the kit allows fitment of any Denali LED Lighting Kit to Ural Motorcycles. All mounting hardware and instructions are included.
Works with similar auxiliary lighting such as the PIAA Line and Hawk lights from SW-MOTECH...
LOUD! Stylish! Rugged!
Producing an earsplitting 120 decibels of sound the SoundBomb is 4 times louder than a standard motorcycle horn! The Denali™ SoundBomb was designed for those who want to be heard but still want to maintain a stylish look. Thanks to its compact design and blacked-out housing the SoundBomb will practically disappear once installed.
This vehicle specific driving light mount allows you to mount any DENALI driving light in the optimum location on your motorcycle. This kit includes beefy powder coated steel brackets with and M8 mounting hole and all necessary mounting hardware.
Exclusive from Twisted Throttle this bike specific light mount for the BMW R1200GS LC allows you to add our Denali DM LED Lights to your motorcycle. This powder coated steel bracket places the two LED pods directly below your stock headlight for a clean factory looking fit.
Laser-cut from mild steel and powder coated black this light mounting bracket is both strong and attractive. The kit allows fitment of any Denali LED Lighting Kit to the Suzuki DL650. All mounting hardware and instructions are included.
Laser-cut from mild steel and powder coated this light mounting bracket is both strong and attractive. It's an ideal match with the lightweight DENALI 2.0 lighting systems: the small-but-powerful DM and the slightly larger and even more brilliant D2...
Package contains four 2amp four 3amp two 5amp two 7.5amp two 10amp and one 15 amp fuses for use in the PowerHub2 Power Distribution Module by Denali. Fuses will work in other products that use mini ATM fuses.
Easy and inexpensive Plug-N-Play wiring kit for DENALI SoundBomb Compact Dual-Tone Air Horn (also works with the Stebel Air Horn) that does not require any cutting soldering slicing or crimping as long as the original horn has blade-style electrical connections. Clip one lead to your original horn trigger wire one lead to battery ground one lead to battery positive and plug in your horn's relay.
I...
Made in America! The PowerHub2 Power Distribution Module manufactured by DENALI allows you to safely connect up to 6 electronic devices to your motorcycle in a clean professional manner. It is CAN-Bus compatible and includes six 15-amp rated and fused outputs six ground posts and a plug-and-play wiring harness for direct battery hookup. Each of the six outputs can be individually set as...
Denali has put together this complete mounting solution for your motorcycle. It consists of an Slotted Bracket a U-Bolt and Nylock nuts to mount the Stebel Air Horn or Denali SoundBomb to the right upright of the tubular fairing stay You do not need to remove the fairing to access this location. This horn mounting bracket may work with other applications on a round pipe ranging from 17mm to 19mm.
Made from heavy-duty 3mm thick 1-inch (26mm) wide strips of steel. Inner hole diameter is 5/16-inch (8mm). Center-to-center hole distance is 3 inches overall length of bracket is 4 inches. Powder-coated flat black. Sold each.
Five pin relay for many automotive applications. Rated for 30-amps of 12-volt DC current. Offered as a replacement part for the Denali SoundBomb Compact Dual-Tone Air Horn.
The Denali Interlink Pod Adapter allows you to link up to 4 Denali D1 Pods to each other with the integrated linking channel designed into the Denali D1 housing.
This wiring harness converts the single-intensity Denali D2S LED light to function as a Denali D2D dual-intensity light. The package comes with everything you need to wire two Denali D2 or DX LED pods including relay and lighted on/off switch for handlebar mounting.
Our custom-fit brackets for the KLR650E provide the perfect mounting location for auxiliary driving lights. Suitable for smaller lights like the DENALI D2 2.0 and DM 2.0.
This adapter is designed to prevent electrical accessories from interfering with the electrical system on late model BMW Ducati and other European motorcycles with a Can-BUS electrical system and a "City Light" 194 marker bulb in the headlight. Please Note: Only compatible with bikes that use a 194 marker bulb and have a "universal" bulb connector; will not fit bikes wi...
DENALI is the only brand that can provide a complete motorcycle lighting and visibility package that includes the lights, light mounts, horn, horn mount, auxiliary brake lights, and a single intelligent plug-n-play controller to provide effortless installation and integrated control of all your accessories.
DENALI 2.0 auxiliary lights deliver industry leading performance with innovative features like integrated dimming and swap-able lens options. Whether your venturing off road at night, or simply want to be more visible to other motorists during the day, DENALI’s robust line of lighting, horns and accessory management makes riding safer and installation easier.
Automotive Offroad Lighting
Motorcycle Electronics
Motorcyle Accessories
Power Management
Automotive Accessories
Outback Offroad Lighting
