Replace the original horn on your motorcycle with the attention grabbing DENALI SoundBomb Split Dual-Tone Air Horn Kit. The SoundBomb lives up to its name by emitting a loud blast that even the most distracted motorists cannot ignore. With 120 decibels of sound output measured at 3 feet the SoundBomb is 4 times louder than a standard motorcycle horn. Designed specifically for motorcycles this horn is vibration and w...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Clear Shot is an all-in-one compact anti-fogging/lens cleaning kit that is perfect for safely cleaning all types of lenses including goggles and helmet visors.
The DENALI SoundBomb compact horn mount for Honda fits to the right side engine case for a clean appearance and simple installation of the ear splitting horn from DENALI. Laser cut steel provides a precise fit and is finished in an attractive black powder coating that enhances durability and corrosion resistance. This low profile horn mount integrates perfectly with the NC700X and only takes only minutes to bolt-on. N...
The RAM Tough-Clawâ„¢ is the perfect mounting base for quick and easy tool-less installation and removal on round square odd shaped rails and bars. The Tough-Clawâ„¢ can be clamped on rails from 0.625" - 1.5" outer diameter. Ideal for mounting tablets action cameras smartphones rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft handle...
Embroidered Twisted Throttle Cap. More comfortable than wearing a motorcycle helmet to the movies. This hat was made of bear hands that bear was killed with bare hands.
The R&G Exhaust hanger Kit is designed to allow removal of the passenger pegs from the YZF-R3 for a cleaner more race inspired appearance. A lightweight laser cut aluminum muffler support is powder coated black for corrosion resistance and screen printed with a custom R series logo. This kit includes a blanking plate for the left side of the bike to cover the unsightly holes left behind after passenger peg remo...
This robust skid plate engine guard provides additional protection for the engine and plastic tank of the KTM 790 Adventure / R & KTM 890 Adventure / R. The 4 mm thick aluminium sheet of high-quality aluminium alloy protects the engine from stone chipping and ground contact, thus offering you more safety and a customized look.
The SW-MOTECH SLC side carriers form part of a comprehensive soft-luggage set for a wide range of bikes. Use them to mount a set of Legend Gear LC1 (9.8 liter) or LC2 (13.5 liter) side cases the sleek 16.5-liter ABS-shell Urban cases or the SysBag 10 (10 liter) or 15 (15 liter) cases. Simple in concept the SLC carriers are made from sturdy powder-coated steel for enduring strength and good looks. They mount...
The S4 is the first light DENALI developed as part of the new S-Series product line. At more than 3000 lumens and economically priced the S4 provides more light per dollar than just about anything else on the market. The new S-Series was specifically engineered to reduce cost without sacrificing performance quality or durability. In fact the S4 features the same high-intensity LEDs as the D-Series lights but utili...
Constructed of heavy-duty machined steel aluminum and high-density nylon R&G frame sliders provide maximum protection and high quality fit and finish. R&G "Aero" sliders have an aerodynamic teardrop shape for a more streamlined look than traditional cylindrical slider pucks.
The R&G Stainless Steel Radiator Guard For Ducati Multistrada 1200 is a more robust radiator guard designed especially for adventure bikes. Constructed from 1 mm stainless steel the radiator guard is incredibly strong and impervious to rust. The laser-cut grill is designed for maximum airflow to the radiator and perfectly compliments the look of your bike! Give your adventure bike that extra bit of protection that c...
Get the TechSpec Gripster Tank Grips for your Africa Twin CRF1000L and you'll experience solid tank grip without any gear snagging. Stop slipping during hard braking acceleration and cornering maneuvers by adding the TechSpec Gripster tank grips to your motorcycle. These super grippy pads are precision cut to suit the contours of your tank. The low profile grips are fabricated using synthetic rubber and sta...
Use these compact LED strips as accent lighting or to increase nighttime visibility. Each 70mm adhesive-backed LED strip contains 15 LEDs and draws only 0.11 Amps.
This SW-MOTECH Brake Reservoir Guard is designed to protect the original fluid receptacle on your bike. Each black anodized master cylinder protector prevents the unintentional removal of the lid and looks really cool too!
The RAM-B-202U-152 contains a 1" diameter rubber ball connected at right angles to a 1.5" x 2" rectangular base. This mount has pre-drilled holes at each corner of the base plate.
The SW-MOTECH Front Axle Sliders Fork Protectors for Ducati Monster Hypermotard Hyperstrada & Multistrada safeguard vulnerable front-end components in the event of a fall or slide. Abrasion resistant PA6 Nylon is designed to contact the pavement before expensive hard parts to prevent damage that could end your ride and cost you some serious cash. These essential front axle sliders are highly recommended for use on t...
Designed to hold an XM or GPS antenna magnetically or via screw down attachment the RAM-344U plate will attach between any RAM base with the AMPS hole pattern and most standard XM units and RAM GPS cradles. Mount your satellite radio receiver or GPS in a RAM cradle and antenna all on a single platform for both ease of installation and use.
Keep your drink handy and in its container with a self leveling RAM Mounts RAP-B-417BU Level Cup Holder XL. With wide springlike rubber feet and adjustable height this cupholder will fit some of the largest and fanciest drink receptacles in the free market today. Enjoy your double mocha caramel latte without spilling a drop on your farkles with a RAP-B-417BU Level Cup by RAM Mounts.
R&G Engine Case Covers are AMA Pro Racing approved. This R&G Racing Engine Case Cover is made from vacuum-formed thermoplastic and designed to fit the right hand side (RHS) crank case cover. Crafted from 4mm polypropylene for maximum grou...
This Givi 4114KIT makes it possible to install the PLX4114 / PL4114 rack without the SR4114 top rack. No modifications are necessary for installation on the Versys. This kit comes with all necessary hardware and mounting instructions.
Replace the original horn on your motorcycle with the attention grabbing DENALI SoundBomb Compact Dual-Tone Air Horn Kit. As the name implies the SoundBomb emits a loud blast that is nearly impossible to ignore by even the most distracted motorists and with 120 decibels of sound output measured at 3 feet the SoundBomb is 4 times louder than a standard motorcycle horn. Designed specifically for motorcycles this horn...
Sometimes it's all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape you've found it. The RAM X-Grip™ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting product...
Light saver headlight guards are constructed of a 30 mil (1.3mm / 0.05" thick) double-polished optical quality poly-vinyl film. This film is applied to the surface of your stock headlight to protect the lens from damage due to rocks bugs and other flying debris. Think of it as a screen saver for your headlights / fog lights!
The RAM-B-346U brake/clutch reservoir cover base fits cleanly over your existing reservoir cover with the 1" ball OFFSET. Made of Die Cast aluminum with an over molded rubber ball both form and function are unsurpassed. Installation is simple and all necessary hardware is included.
The R&G right side carbon DuPont™ Kevlar® engine case slider is designed to help protect your engine case from damage. A high gloss finish compliments the beautiful twill weave pattern with a screen printed logo. This elegant carbon case slider will significantly enhance aesthetics while reducing the risk of damage in a fall or slide. Installation is simple and the included silicone provides a secure fit. Keep your BM...
Our custom-fit brackets for the KLR650E provide the perfect mounting location for auxiliary driving lights. Suitable for smaller lights like the DENALI D2 2.0 and DM 2.0.
Adjustable cradle for mounting larger cellphones or video iPods. This kit may be mounted directly to any RAM-B-238 mounting base as well as any Techmount Bags-Connection SW-MOTECH GPS holder. Cradle Clamping Dimensions: Height Range: 4.75" - 6.25" Width Range: 2.25" - 3.25"
Confidently and conveniently mount a smartphone or GPS navigation device to your motorcycle with the SW-MOTECH Navi Case Pro S. Water resistant zippers seal out moisture to protect expensive electronics while a touch sensitive screen cover makes it easy to access your information as its protected from the elements. This handy Navi case features internal Velcro straps to secure the device in the padded interior. The du...
If you're tired of seeing your own shoulders in your rearview mirrors then these are for you! This pair of mirror extenders screw into the original mirror mount on your motorcycle's fairing providing a milled aluminum spacer between the base of the rearview mirror and the motorcycle's fairing.
The RAM-B-345U brake/clutch reservoir cover base fits cleanly over your existing reservoir cover with the 1" ball CENTERED. Made of Die Cast aluminum with an over molded rubber ball both form and function are unsurpassed. Installation is simple and all necessary hardware is included.
This Stainless Steel Radiator Guard is designed to be the ultimate in radiator protection for the BMW S1000XR. Laser cut vents provide maximum airflow while preventing rocks bugs and other road debris from causing impact damage and becoming lodged in the cooling fins resulting in decreased cooling ability. Completely resistant to corrosion this radiator guard will continue to look good while preserving your expe...
This adapter is designed to prevent electrical accessories from interfering with the electrical system on late model BMW Ducati and other European motorcycles with a Can-BUS electrical system and a "City Light" 194 marker bulb in the headlight. Please Note: Only compatible with bikes that use a 194 marker bulb and have a "universal" bulb connector; will not fit bikes wi...
The Denali Horn Mounting Bracket allows mounting of the DENALI SoundBomb to the Versys 650. Precise laser cut steel is powder coated black for smooth looks and a long lasting finish. This bracket attaches to the frame with no drilling or modifications leaving you with a stealthy and factory looking installation.
The X-Gripâ„¢ IV has a clean and clever four leg design that sports great holding power without hiding your phone or phablet behind foam pads and plastic.
Bike-specific mount kit for installing Denali SoundBomb Split Dual-Tone Air Horn on a Kawasaki Versys 1000 LT. All mounting hardware and instructions included. For easy wiring check out our Plug-n-Play wiring kit....
Includes two 1/2" (12.7mm) tall M5 spacers and two M5x30mm lenshead screws. Used to level out the tank bag on certain Quick-Lock tank bags when used on particular bikes.
Adapter kit required for attaching Shad sidecases to SW-MOTECH Quick-Lock EVO carrier. Includes all hardware required to mount one pair of sidecases to your sideracks.
Equip your N1 Pro Navigation and Dashcam system with these handy tire pressure monitoring sensors! These sensors easily install to your tire’s valve stem and link with the N1 Pro to give you tire pressure and temperature data on the fly. Features: Includes 1 front and 1 rear tire pressure monitoring sensors, washers and a […]
INNOVV N1 Pro Motorcycle Dash Cam and Navigation System The INNOVV N1 Pro dash cam is engineered for motorcycle enthusiasts, offering a blend of durability and mobile integration. Its waterproof, vibrant 5.99-inch display works flawlessly with iOS and Android via Apple CarPlay and Android Auto, enhancing navigation and connectivity. With front and rear recording at […]
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
***** COMING OCTOBER 2024 ***** Protection like never before. We’re excited to announce that our extensive and much-loved range of Radiator Guards is getting bigger, better and lighter. Introducing the new PRO range. Our PRO range features a new geometric ‘hexa’ design that offers serious protection to your delicate radiators without restricting performance or airflow. Cut from […]
This Tank Slider (pair) kit is compatible with the Yamaha YZF-R6 '17- models.As used by the California Superbike School. (http://www.superbikeschool.com/)Our Tank Sliders are made from Carbon fibre reinforced with DuPont™ Kevlar®, offering excellent crash protection and wear resistance. Specially moulded to fit perfectly onto the tank, they are designed to fit onto the most pronounced corners and likely areas to get hit in the event of a crash or drop.Made in the U.K.Application takes only minutes and they could save you having to replace your tank which can get dented or scratched in the event of a crash.
This closeout item is NOT compatible with Denali Gen 2 harnesses or CANsmart controllers. It can only be used with the on/off switch and harness in the box. The large 10° optic in the DENALI DR1 maximizes the distance you can see down the road by concentrating a spot beam pattern at the center of […]
R&G Second Skin stone chip protection film is a non-yellowing (UV Stable), ultra-tough, easy-to-apply, polyurethane protective film. Designed to protect your road or track motorcycle from stone chips, road salt, tar, abrasions, fairing stress fractures and bodywork/fuel tank scratches from general use. The unique properties of our protection film enable it to disperse the impact […]
GIVI EA145 Adjustable Waist-bag Materials:• Polyester 600D PU and laminated PU Polyester• Pu inserts and fluorescent yellow reflective piping• Matt black reflective material Manufactured within REACH recommendations As standard:• Inner pocket• Front pocket • Rear pocket• Reflective prints and inserts
This clever retrofit kit transforms a DENALI D3 Fog or D3 Hybrid Driving Light into a vehicle-specific lamp assembly for direct replacement and plug-&-play connection to Ford F Series Trucks. Significantly increase your light output and give your F150, F250 or F350 a sleek modern look by upgrading your weak factory fog lights to a set of […]
This clever retrofit kit transforms a DENALI D3 Fog or D3 Hybrid Driving Light into a vehicle-specific lamp assembly for direct replacement and plug-&-play connection to the Jeep Wrangler (Jk & JL) and Jeep Gladiator JT. Significantly increase your light output and give your Jeep a sleek modern look by upgrading your weak factory fog lights to […]
This vehicle-specific kit gives you everything you need to mount, and wirelessly charge, your phone in the ideal location on your Kawasaki KLR650! The rally style mount positions your phone above the dash so you can clearly see your GPS without taking your eyes off the road. This product bundle features the RAM® Quick-Gripâ„¢ Phone Cradle which is powered […]
This universal kit gives you everything you need to mount, and wirelessly charge, your phone on 12mm-14mm OD bars and tubes. This product bundle features the RAM® Quick-Gripâ„¢ Phone Cradle which is powered by a proprietary plug-&-play DENALI® charging harness that is designed to plug into the DENALI® CANsmartâ„¢ controller or be connected directly to your battery. […]
Harness the flexibility and intelligence of your BMW motorcycle’s CANbus electrical system to make installation of accessories drastically easier with the DENALI CANsmartâ„¢ Controller. The DENALI CANsmartâ„¢ Controller provides plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be controlled right from your BMW’s existing handlebar switches, […]
The S4 is the first light DENALI developed as part of the new S-Series product line. At more than 3000 lumens and economically priced the S4 provides more light per dollar than just about anything else on the market. The new S-Series was specifically engineered to reduce cost without sacrificing performance quality or durability. In fact the S4 features the same high-intensity LEDs as the D-Series lights but utili...
Get ready for your next motorcycle adventure with luggage mounted on SW-MOTECH PRO Side Carriers. With available adapters that allow lockable mounting and removal of a wide range of side cases as well as soft saddlebag luggage you can tailor this rack to meet a variety of challenges. QUICK-LOCK quarter turn fastening mounts allow the racks to be removed with a multi-tool or screwdriver when not needed while a perman...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This R&G Radiator Guard & Oil Cooler Guard is available in black, titanium or red to fit the Ducati Streetfighter V4(S) '20-, Panigale V4R '19-, Panigale V4(S) '18- & Panigale Speciale '18-. Protecting the radiator and oil cooler from damage from road debris.Made from pressed aluminium and feature a neat, seamless frame (where applicable). They improve the looks of your bike and help to protect your expensive and vulnerable radiator and oil cooler from flying debris. No permanent modifications need to be made to the bike.
Carbon Tank Slider (pair) kit.As used by the California Superbike School. (http://www.superbikeschool.com/)Our Tank Sliders are made from Carbon fibre reinforced with DuPont™ Kevlar®, offering excellent crash protection and wear resistance. Specially moulded to fit perfectly onto the tank, they are designed to fit onto the most pronounced corners and likely areas to get hit in the event of a crash or drop.Made in the U.K.Application takes only minutes and they could save you having to replace your tank which can get dented or scratched in the event of a crash.
Available for the Aprilia RS660 '21- models, this R&G Titanium radiator guard is both lightweight and super strong, thanks to its real Titanium (ASTM B265 Grade 1) mesh construction, encased in a seamless aluminium frame.This specific R&G radiator guard is made from an expanded ASTM B265 Grade 1 Titanium sheet and features a neat, seamless aluminium frame, securely holding the guard in place (utilising existing mounting or brackets).Made in the UKPicture is for illustration purposes only and may not be the same bike as listed in the description.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
If you are heading off-road, then these bash plates are a must have. Protecting the engine cases and oil coolers from rocks, stones and logs, they are invaluable to make sure you get home. Also highly useful against road debris that is found in everyday riding. Bash Plate For Honda CRF 450X 2013-2018 (BP0008SI) Protect […]
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the ‘Lever Guard’ was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but […]
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the ‘Lever Guard’ was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but […]
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but […]
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the ‘Lever Guard’ was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but […]
This R&G Carbon Fibre Tail Slider kit is compatible with the Aprilia Tuono V4 (FACTORY) / RSV4 (FACTORY) '21- models.Our Tail Sliders are made from Carbon fibre reinforced with DuPont™ Kevlar®, offering excellent crash protection and wear resistance. Specially moulded to fit perfectly onto the tail, they are designed to fit onto the most pronounced corners and likely areas to get hit in the event of a crash or drop.
Automotive Offroad Lighting
Motorcycle Electronics
Motorcyle Accessories
Power Management
Automotive Accessories
Outback Offroad Lighting
