SW-MOTECH roll-top dry bags are made from waterproof welded tarpaulin PVC. Even when sitting in a puddle your stuff stays dry! The 35-liter size works well as a stand-alone rear bag.
The brand new Drybag 80 from SW-MOTECH was designed to be used as a tankbag tailbag crashbar bag or wherever else you might need small waterproof storage. Easily remove it from the bike and sling it over your shoulder and take it with you. Product Minute: SW-MOTECH Drybag 80
Wind noise while motorcycle riding regularly exceeds the levels at which hearing damage will occur. Protect your hearing without blocking the sounds you want to hear with the NoNoise Motorsport noise filter hearing protection.
Easy and inexpensive Plug-N-Play wiring kit for DENALI SoundBomb Compact Dual-Tone Air Horn (also works with the Stebel Air Horn) that does not require any cutting soldering slicing or crimping as long as the original horn has blade-style electrical connections. Clip one lead to your original horn trigger wire one lead to battery ground one lead to battery positive and plug in your horn's relay.
I...
Made in America! The PowerHub2 Power Distribution Module manufactured by DENALI allows you to safely connect up to 6 electronic devices to your motorcycle in a clean professional manner. It is CAN-Bus compatible and includes six 15-amp rated and fused outputs six ground posts and a plug-and-play wiring harness for direct battery hookup. Each of the six outputs can be individually set as...
Constructed of 22mm OD (outer diameter) heavy-duty mild steel SW-MOTECH crash bars are designed to provide maximum protection optical integration and high-quality fit and finish.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
MRA X-Creen Sport Add-On Variable Windscreen Spoiler Blade is an ideal size for small scooters and sportbikes. This spoiler is available to fit most original motorcycle windshields to act as an adjustable wind deflector that will be set to redirect the air flow just the way you want it. Available in clear or light smoke.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Designed for dual sport enduro and trail motorcycles with 7/8in motorcycle handlebars the Barkbusters JET lever and wind protection handguards will keep a crash from ending your ride early. Easy to install heat treated aluminum backbones feature two mounting points to provide the strength needed to prevent lever damage. Impact resistant deflectors available in multiple colors provide protection for your hands fro...
Tidy up your rear end with this R&G Tail Tidy/Licence Plate Holder! This tail tidy is compatible with ALL exhaust systems currently available. Constructed of stainless steel and powder coated for durability this unit will accept factory as well as R&G standard or mini indicators in a variety of positions to suit the size of the number plate or if using luggage. This Tail Tidy includes a mini light to illuminate the l...
R&G Tank Sliders are made from DuPont™ Kevlar® reinforced carbon fiber. Specially molded to fit the most pronounced corners of the tank to offer protection in the event of a tip over or mild crash.
R&G crash bars are ideally suited for when a standard frame slider just wont cut it. Excellent coverage and 3 mounting points per side to help distribute the impact over a larger surface thus reducing the damage to your motorcycle.
The DrySpec STASH BOX is a weather resistant storage box that mounts between the motorcycle and the license plate. It is ideally suited to storing the vehicle registration and other small objects while remaining unobtrusive. The Stash Box has features that provide benefits over other motorcycle storage devices i.e. low cost concealed mounting location vehicle styling is unaffected and easy accessibility.
This DrySpec Motorcycle Tool Tube Kit attaches directly to the outside of any flat-sided sidecases and can be used to carry our MSR 30 oz. Fuel Bottle and any other gear that can fit inside of it.
New design with a 4mm-thick base plate and 3mm-thick side plates overlap at the seams to provide 7mm-thick rails on the outer edges of the skid plate for added strength and stability. Two-tone black and aluminum finish.
Constructed of heavy-duty mild steel SW-MOTECH crash bars are designed to provide maximum protection optical integration and high-quality fit and finish.
For use with original top clamp. Adds an additional 20mm of rise to the bar height without changing of control cables wiring or hoses. However the installer should always check for adequate cable/wiring/hose slack during installation. Available in polished silver finish.
R&G Tank Sliders are made from DuPont™ Kevlar® reinforced carbon fiber. Specially molded to fit the most pronounced corners of the tank to offer protection in the event of a tip over or mild crash.
R&G Tank Sliders are made from DuPont™ Kevlar® reinforced carbon fiber. Specially molded to fit the most pronounced corners of the tank to offer protection in the event of a tip over or mild crash.
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight.
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight. Fits with OEM handguards and with/without OEM heated grips.
The R&G aero style frame sliders for Aprilia RSV4 & Tuono V4 provide essential protection in the event of a fall or slide by keeping the motorcycle off of the ground and safe from severe damage. High Density Polyethylene (HDPE) pucks absorb impacts and resist abrasions and sacrifice themselves before the rest of the motorcycle touches the ground. These high quality sliders are securely bolted to the frame with...
This Hexagonal Exhaust Protector is suitable for hexagonal cans such as the Akrapovic Hex and the standard Yamaha R6 '06-'11 can. It fits both left and right cans/exhausts. Images 4, 5 & 6 show the product fitted to a BMW S1000RR. Made in the U.K.
These crash bars are ideally suited for when a standard frame slider just wont cut it. R&G adventure bar crash bars are up to the job. Excellent coverage and 3 mounting points per side to help distribute the impact over a larger surface thus by reducing the dame to your motorcycle.
The must-have accessory for sport-touring! Greatly eases basic chain maintenance tire changes parking and bike cleaning. Super-strong steel construction features typical German design and high engineering standards. Superb integration with the factory exhaust and sidestand components—retain all existing features without sacrificing lean angle or clearances.
Add 180 grams of mass to the end of each of your handlebars to reduce vibration. Barkbuster Bar End Weights are compatible with full-wrap Storm and VPS hand guards. They will not mount to the motorcycle by themselves they work in conjunction with Barkbuster full wrap hand guards.
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight.
KAOKO Throttle Lock Cruise Control for Select Kawasaki Motorcycles
Kaoko Cruise Controls consist of a friction nut that is integral with a replacement handlebar-end weight.
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight. Also fits most other Honda models with 28mm outer diameter (OD) bar-end weights.
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight. fits with/without BMW handguards and with Touratech handguards.
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight. Does not fit K1200RS.
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight. Will work with or without SW-MOTECH KOBRA or Barkbusters Full-Wrap handguards. Please Note: This item does not need the plastic thrust washer that is shown in the installation instructions and so it is not included in the kit. ...
Mounting kit for all MRA two-point-mounted naked-bike windscreens. This universal kit fits both 7/8-inch diameter and 1-inch diameter handlebars. Chrome with black nylon fittings.
The must-have accessory for sport-touring! Greatly eases basic chain maintenance tire changes parking and bike cleaning. Super-strong steel construction features typical German design and high engineering standards. Superb integration with the factory exhaust and sidestand components—retain all existing features without sacrificing lean angle or clearances.
This reflective vinyl bumper sticker shines like the sun when targeted with a night-time headlight beam. Great for increasing rider visibility when used on a motorcycle helmet bumper or hard luggage. Of course our graphic designer says people should just stick it on because it looks cool. Warns others of your true intentions.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Replace the deflectors on your aluminum bar backbones with Barkbusters VPS wind protection replacement handguards. For use with VPS or Storm style handguard models. Available in all standard Barkbusters handguard colors.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
MRA X-Creen Bolt-On Variable Windscreen Spoiler Blade is available to fit most original motorcycle windshields. This bolt-on style requires you to drill holes in your existing screen. Available in clear or light smoke.
